Evolution EVO180 Manual de Instruções descarregar pdf (Página 10)

www.evolutionsteel.com

GETTING STARTED

WARNING: Always disconnect the saw from the

power source before making adjustments.

Refer to the “Service Parts Diagram”. Install a blade

as detailed in the “Installing or Removing a Blade”

section.

WARNING: Never start the saw with the cutting

edge of the saw blade in contact with the workpiece

surface. Do not retract blade guard manually. Guard

retracts automatically.

This saw is equipped with an approved cord and

plug for its intended Country of use. Do not alter or

modify the power cord.

Installing or Removing a Blade

WARNING: Only use genuine Evolution blades

which are designed for this machine. Ensure that

the maximum speed of the blade is compatible with

the machine. Only perform this operation with the

machine disconnected from the power supply.

Note: It is recommended that the operator

considers wearing protective gloves when handling

the blade during installation or when changing the

machines blade.

1. Place saw on a level, secure surface.

2. Remove the chip collector from the machine by

undoing the (2) large thumb screws. (Fig. 1)

Note: The chip collector thumb screws are ‘captive’

and cannot be removed from the machine.

3. Lock the machine arbor by engaging the arbor

lock. (Fig. 2)

4. Using the supplied Allen Key loosen and remove

the arbor socket headed screw and outer blade

drive ange. (Fig. 3)

5. Remove the saw blade.

6. Thoroughly clean inner and outer blade drive

anges and blade mounting surface before

installing a new blade.

7. Ensure that the direction of rotation arrows

printed on the blade, match the direction of rotation

arrow found on the chip collection cover. (Fig. 4)

8. Reinstall the outer drive ange and the arbor

socket headed screw.

9. Engage the arbor lock and tighten the arbor

socket headed screw securely using the Allen key.

Note : The socket headed arbor screw has a RH

thread.

GETTING STARTED

FIG 1

FIG 2

FIG 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Evolution EVO180 Manual de Instruções Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Evolution EVO180